Odroid-C1+

Odroid-C1+

ODROID-C1+

 

The ODROID-C1+ is esteemed to be the most powerful low-cost single board computer available, as well as being an extremely versatile device. Featuring a quad-core Amlogic processor, advanced Mali GPU, and Gigabit Ethernet, it can function as a home theater set-top box, a general purpose computer for web browsing, gaming and socializing, a compact tool for college or office work, a prototyping device for hardware tinkering, a controller for home automation, a workstation for software development, and much more.

Some of the modern operating systems that run on the ODROID-C1+ are Ubuntu, Android, Fedora, ARCHLinux, Debian, and OpenELEC, with thousands of free open-source software packages available. The ODROID-C1+ is an ARM device -- the most widely used architecture for mobile devices and embedded 32-bit computing. The ARM processor’s small size, reduced complexity and low power consumption makes it very suitable for miniaturized devices such as wearables and embedded controllers.

* Amlogic ARM® Cortex®-A5(ARMv7) 1.5Ghz quad core CPUs 
* Mali™-450 MP2 GPU (OpenGL ES 2.0/1.1 enabled for Linux and Android)
* 1Gbyte DDR3 SDRAM
* Gigabit Ethernet
* 40pin GPIOs + 7pin I2S
* eMMC4.5 HS200 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot
* USB 2.0 Host x 4, USB OTG x 1 (power + data capable)
* Infrared(IR) Receiver
* Ubuntu or Android OS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The C1+ is the latest revision of the original C1.
It replaced the original C1 in July 2015. Compared to the C1 it has :

- Standard Type-A HDMI connector
- An included heat sink on board
- An I2S bus to support HiFi audio add-on boards
- CEC function that doesn't require the RTC backup battery
- A power path from USB OTG port as well as DC barrel connector
- Improved SD-card compatibility

NB: Because of the above changes, the original cases and heat sinks are not compatible.

Here is the comparisons to give you better understanding of ODROID-C1.

ODROID-C1 vs Raspberry Pi2

Both are Linux-friendly, $35 ARM® single-board computers for various applications and purposes. 

Hardware Comparison

The ODROID-C1 has many advantages over the Raspberry Pi. The processor is an S805 1.5GHz Quad-core from Amlogic with 1GByte DDR3 RAM, Gigabit Ethernet and IR-receiver. The size of this computer is still only 85 x 56 mm with a weight of 40g, and offers silent operation, 2~3W average power usage, and instant portability, since it fits in a shirt pocket.

One powerful feature of the ODROID-C1 is the row of GPIO (general purpose input/output) pins along the edge of the device. These pins are a physical interface between the board and the outside world. The 40pin interface header includes SPI, I2C, UART, ADC and GPIO function.

An SD 3.01 standard compatible UHS-1 Micro-SD card, as well as the faster eMMC module, can be ordered with the ODROID-C1, and arrives with the popular Ubuntu operating system already installed. Insert the SD card into the slot, connect a monitor, a keyboard, a mouse, Ethernet and power cable, and that’s all you need to do to use the ODROID-C1! Browse the web, play games, run office programs, edit photos, develop software, and watch videos right away.

The RTC, IR receiver and ADC features on the ODROID-C1 offer many options for building great DIY projects
 
 ODROID-C1RPi 2 Model B
CPU
Amlogic S805 SoC
4 x ARM® Cortex®-A5 1.5GHz
ARMv7 Architecture @28nm
Broadcom BCM2836
4 x ARM® Cortex®-A7 900Mhz
ARMv7 Architecture @40nm
GPU2 x ARM® Mali™-450MP 600MHz1 x VideoCore IV 250MHz
RAM1GB 32bit DDR3 792MHz1GB 32bit LP-DDR2 400MHz
Flash StorageMicro-SD UHS-1@100Mhz/SDR50 or eMMC storage optionMicro-SD @50Mhz/SDR25, No eMMC storage option
USB2.0 Host4 Ports4 Ports
USB2.0 Device / OTG1 Port for Linux USB Gadget driverNo
Ethernet/LAN10/100/1000 Mbit/s10/100 Mbit/s
Video OutputHDMIHDMI / Composite RCA
Audio OutputHDMIHDMI / 3.5mm Jack
Camera InputUSB 720pMIPI CSI 1080p
Real Time ClockYES (On-board RTC)No(unless using an add-on module)
IR ReceiverYES (On-board IR Sensor)No(unless using an add-on module)
IO Expansion40pin port (GPIO/UART/SPI/I2C/ADC)
7pin port (I2S) : ODROID-C1+ only
40pin port (GPIO/UART/SPI/I2C/I2S)
ADC10bit SAR 2 channelsNo(unless using an add-on board)
Size85 x 56mm (3.35” x 2.2”)85 x 56mm (3.35” x 2.2”)
Weight40g (1.41 oz)42g (1.48 oz)
Price$35$35


Computing performance comparison


We ran a simple, popular benchmark called Unix-Bench, SysBench and N-Bench to compare the performance of the two boards. Tests were done using several manufacturer-provided images based on a clean install, and the “apt-get update && apt-get upgrade” commands were first run to ensure that both boards was up-to-date.

The RPi2 was clocked at 900Mhz using a Sandisk UHS-1 8GB SDCard running the Raspbian OS. The C1 was clocked at 1.5Ghz using an 16GB eMMC with Ubuntu 14.04 OS. Both units were powered by a 5V/2A power supply and connected to the 1920x1080 HDMI output.
 
C1_benchmark.jpg
 
Benchmarks(Index Score)ODROID-C1Raspberry Pi 2Ratio
Dhrystone-2 1262.81006.61.25
Double-Precision Whetstone (x3)1318.81076.11.23
Nbench2.2.3 Integer ( x40)1208.0840.01.44
Nbench2.2.31050.0809.01.30
SysBench CPU ( 1/T * 50000)863.6669.31.29
SysBench RAM998.3574.71.74

The results show that the CPU computing benchmark is about 30% faster on the C1 and RAM memory access speed is about 75% faster on the C1.
Note that above benchmark scores were converted to make an easier comparison.
 

Storage I/O comparison


To obtain the results in the storage I/O comparison graph, type the following lines at a command prompt. The first command tests the write speed, and the second command tests the read speed:

$ dd if=/dev/zero of=test.tmp oflag=direct bs=500K count=1024 

$ dd if=test.tmp of=/dev/null iflag=direct bs=500K count=1024

 
C1_IO.jpg   
Media access performanceRPi2 Model BODROID - C1
eMMC Read (MB/s)NA62.2
eMMC Write (MB/s)NA25.1
MicroSD UHS-1 Read (MB/s)19.232.5
MicroSD UHS-1 Write (MB/s)13.114.2









 

If you use the eMMC storage, you can get about two to three times faster storage I/O read performance. However, an affordable microSD UHS-1 card can still achieve reasonably fast speeds thanks to the advanced SD 3.01 host controller in the S805 processor. The MicroSD card read performance on C1 is still about 1.7 times faster then RPi if you use the UHS-1 memory card.
 

Ethernet IO comparison


To replicate the results in the Ethernet comparison graph, type the following lines at a command prompt:
Server agent on the C1 and Client agent on the host PC
ruppi@ruppi-desktop:~$ iperf -s 192.168.2.10 -P 10
[SUM]  0.0-10.1 sec  1.10 GBytes   928 Mbits/sec


Server agent on the host PC and Client agent on the C1
odroid@odroid:~# iperf -c 192.168.2.2 -P 10
[SUM]  0.0-10.0 sec   467 MBytes   392 Mbits/sec


Server agent on the RPi and Client agent on the host PC
ruppi@ruppi-desktop:~$ iperf -c 192.168.2.11 -P 10
[SUM] 0.0-10.3 sec 121 MBytes 98.6 Mbits/sec


Server agent on the host PC and Client agent on the RPi
pi@raspberrypi:~$ iperf -s 192.168.2.2 -P 10
[SUM] 0.0-10.3 sec 81.6 MBytes 66.6 Mbits/sec


Thanks to the Gigabit Ethernet available on the ODROID-C1, the network performance of C1 is an impressive six to nine times faster than Raspberry Pi.
    ODROID-C1_Ethernet.jpg

 

As one can see from the testing results, the quad-core 1.5GHz ODROID-C1 can easily outperform the Raspberry Pi 2 board. Many test results show about 140% more performance from the ODROID-C1 platform. Even though both platforms are Linux-friendly computing devices, the performance to cost ratio is much higher with the ODROID-C1. If you are considering a tiny computer for general purpose computing, software development, or as a project platform, the ODROID-C1 will give you a lot more satisfaction and fun with incredible performance for a very low price.
 
SPECIFICATIONS
ProcessorAmlogic S805 SoC ARM® Cortex®-A5 (ARMv7) 1.5GHz Quad Core ARMv7 architecture @28nm wafer
Memory1Gbyte DDR3 RAM 792Mhz
3D AcceleratorARM® Mali-450 MP2 OpenGL ES 2.0 / 1.1
Flash StorageeMMC Module Socket : eMMC module (option)
MicroSD Card Slot : 8 or 16GB MicroSD UHS-1 (option)
USB2.0 HostHigh speed standard A type connector x 4 ports
USB2.0 Device/OTGHigh Speed USB standard A type connector x 1 port
Ethernet/LAN10/100/1000Mbps Ethernet with RJ-45 Jack (Auto-MDIX support)
Video OutputHDMI
Audio OutputHDMI
Camera InputUSB 720p(option)
Real Time ClockOn-board RTC function with a backup battery connector
IO Expansion40pin port (GPIO/UART/SPI/I2C/ADC)
7pin port (I2S)
WiFiUSB IEEE 802.11b/g/n 1T1R WLAN with Antenna (USB module) (option)
Power5V 2A Power (option)
System SoftwareUbuntu 14.04 + OpenGL ES on Kernel 3.10 LTS
Android 4.4.x on Kernel 3.10 LTS
Full source code is accessible via our Github.
PCB Size85 x 56 x 18 mm approx. (Weight : 40 gram w/o heat sink,   56 gram with heat sink)
 

 

 

 

 

 

 

 

 

Write a review

Note: HTML is not translated!
    Bad           Good

Express Checkout

includes GST

Price includes GST
 

  • Views: 10103
  • Brand: Odroid
  • Product Code: Odroid-C1+
  • Availability: Out Of Stock
  • AUD $64.50

Tags: Odroid-C1