ODROID GO Advance Black Edition Aura Black

New ODROID GO Advance Black Edition Aura Black

ODROID-GO Advance Black Edition Aura Black

Please Note that this item requires assembly

PACKAGE INCLUDE

AUSB Type-C Power CableJD-PAD rubber
BTop enclosureKA, B, X, Y button rubber
CBottom enclosureLbattery sticker
DPlastic L/R/L2/R2 trigger, X, Y, power ButtonsMAnalog joystick
EPlastic D-pad, A, B ButtonsN320×480 TFT LCD
FODROID-GO-Advance boardO0.5W speaker
G3000mAh batteryP1.7×5 screws (7 pcs)
HLCD windowQ1.7×8 screws (4 pcs)
II ~ VI button rubberRDriver

 

* 8GB or higher capacity MicroSD card is additionally required. 

You can download the OS image and then, you will write the image to your SD card. There are some ways to write the OS image. For beginners, we recommend the use of an Etcher tool.

Installing OS image on your SD card

 

ASSEMBLY GUIDE

https://wiki.odroid.com/odroid_go_advance/go_adv_assembling

  • Force Power OFF

If you have any problem with your ODROID-GO-Advance, you will try to switch off.
You can switch off ODROID-GO-Advance by pushing the on/off buttons for about 6 seconds.

ODROID-GO Advance Tips And Tricks:

 

DISSASSEMBLY GUIDE

THE EMULATOR SUPPORTS

atari2600
atari5200
atari7800
atarilynx
gamegear
gb
gba
gbc
mastersystem
megadrive
nes
pcengine
pcenginecd
psx
segacd
snes
psp

And more

  • Some game ROMs cannot run at full speed.

SPECIFICATIONS

ProcessorCPU : RockChip RK3326(Quad-Core ARM Cortex-A35 1.3GHz)
GPU : Mali-G31 Dvalin
Memory1GB (DDR3L 786Mhz, 32 Bits bus width)
StorageSPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface)
Display3.5inch 320×480 TFT LCD (ILI9488, MIPI interface)
AudioEarphone Jack, 0.5Watt 8Ω Mono
BatteryLi-Polymer 3.7V/3000mAh, Up to 9 hours of continuous game playing time
DC Jack5V input, USB-C power connector: A USB-C charging cable is included in the package.
External I/OUSB 2.0 Host x 1, 10Pin port(I2C, GPIO, IRQ at 3.3Volt)
Input ButtonsF1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Left Shoulder2, Right Shoulder2, Analog joystick
WirelessBuilt-in 2.4Ghz 802.11b/g/n (ESP-WROOM-S2)
Power consumptionGame emulation: 300 ~ 550mA (depends on backlit brightness and type of game emulations and the wireless usage)
Power off mode: <1mA
If you turn off the WiFi, the power consumption will be same as the previous Revision 1.0.
Charging time2.5~3 hours when the device turns off. When you play game, it takes 4~5 hours.
Dimensions155x72x20 mm (6.1×2.8×0.8 inch), Weight: 180 g (6 oz)

 

DIAGRAM

 

 

BOARD DETAIL

APMIC(RK817) including a charger and audio features.DX, Y, A, B buttons
BD-pad buttonsETrigger Left2
CI ~ VI buttons (F1, F2, F3, F4, F5, F6)FTrigger Right2
 

ACPU : Rockchip RK3326KUSB-C power Jack
BRAM : 1GB DDR3LL10pin expansion port
CSPI Flash(16Mbytes Boot)MAudio jack
DMicroSD card slotN20pin LCD connector
EForced SD card boot(without spirom)OPWR switch
FUART port(But not mounted default)PAnalog joystick connector
GSpeaker connectorQLeft trigger button
HBattery connectorRRight trigger button
IUSB 2.0 type-A HostSWireless module ESP-WROOM-S2
JStatue LED(charger, alive, power)

Write a review

Note: HTML is not translated!
    Bad           Good

Express Checkout

includes GST

Price includes GST
 

  • Views: 231
  • Brand: Odroid
  • Product Code: ODROID GO Advance Black Edition Aura Black
  • Availability: In Stock
  • AUD $112.00

Tags: ODROID GO Advance Black Edition Aura Black