ODROID-H2+

Click Image for Gallery

Description
Reviews (0)

ODROID-H2+ Single Board Computer

Introduction

Current delivery due to demand for this item is 7 days.

This is a very powerful x86 64bit single board computer with large memory capacity and advanced IO ports.
Intel® Quad-Core Processor J4105 up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread), 14nm with 4MiB Cache.
Dual-channel Memory DDR4 up to PC19200 (2400MT/s)
Total 32GiB RAM Space with two SO-DIMM slots
4 x PCIe 2.0 for one M.2 NVMe storage
2 x Gbit Ethernet ports
2 x SATA 3.0 ports
SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
Intel UHD Graphics 600 (Gen9.5 GT1) 700Mhz
HDMI 2.0 and DP 1.2 multiple video outputs

NB: This device requires a 15Volt 4 Amp power supply. See options when purchasing.

A	CPU (Intel Celeron J4105 Processor)	K	1 x DisplayPort 1.2
B	2 x DDR4 SO-DIMM slots (Dual channel memory support)	L	2 x RJ45 Ethernet Ports (10/100/1000)
C	1 x M.2 PCI Express Module Socket (NGFF-2280)	M	5 x System LED Indicators
D	1 x eMMC (Embedded Multimedia-Card) Socket	N	1 x Peripheral Expansion Header (20-pin)
E	2 x SATA Power Connectors	O	1 x Power Switch
F	2 x SATA3 6.0 Gb/s Data Connectors	P	1 x Reset Switch
G	1 x DC Power Jack	Q	1 x Backup Battery Connector (2-pin)
H	2 x USB 3.0	R	1 x Active Cooling Fan Connector (4-pin)
I	2 x USB 2.0	S	1 x Audio out 1 x Audio in 1 x SPDIF out
J	1 x HDMI 2.0	S	1 x Audio out 1 x Audio in 1 x SPDIF out

Specifications

Form Factor	Dimensions: 110mm x 110mm x 47mm Weight: 285 g including heatsink
Processor	Intel Celeron J4105 Processor (14nm, TDP 10W) Up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread) 4MB L2 Cache UHD Graphics 600 (Gen 9.5 LP GT1 up to 700MHz) Fan-less design
Memory	2 x DDR4 1.2V SO-DIMM slots Dual Channel, up to 2400 MT/s (DDR4-PC19200) Max memory capacity 32GB DDR3 is not supported Link to Samsung DDR4 DIMM
Storage	1 x eMMC connector (bootable and selectable on BIOS) Various eMMC modules can be purchased at Hardkernel store 2 x SATA3 6Gbps 1 x M.2 NVMe slot (PCIe 2.0 x 4, supports NGFF-2280 cards) M.2 SATA SSD is not supported
Networking	2 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps) Realtek RTL8111G Supports Wake-On-Lan LED indicators (Green: Link, Amber: Traffic)
Video	1 x DisplayPort 1.2 (up to 4K@60Hz) 1 x HDMI 2.0 (up to 4K@60Hz) Dual simultaneous display support
Audio	1 x Audio out (3.5mm jack) 1 x Audio in (3.5mm jack) 1 x SPDIF out (ALC662, HDA codec)
External I/O	2 x USB 3.0 Host ports 2 x USB 2.0 Host ports 1 x Peripheral Expansion Header (20-pin, 2.54mm pitch) 1 x DC 5V, 1 x DC 3.3V, 5 x GND 2 x UART (TXD/RXD/RTS/CTS) 2 x I2C (SCL/SDA) 1 x External Power Button All 3.3V I/O signal level
Other features	Passive Heatsink BIOS Backup Battery Maintains system time and BIOS settings Power Button Reset Button System LEDS Indicators: Red (PWR) – Solid light when DC power is supplied Blue (left, ALIVE) – Solid light when System is running Blue (right, RESET) – When the RESET button is pressed Amber (SATA) – Flashes when there is data transfer Green (NVMe) – Flashes when there is data transfer Active Cooling Fan Connector (5V 4-pin, PWM input + TACHO output) Active Cooling Fan is optional Connector (4-pin, 1.25mm pitch)
Power	1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm DC 14V ~ 20V (up to 60W) DC 15V/4A power adaptor is recommended Power consumption: IDLE : ≃4W CPU Stress : ≃14W CPU+GPU Stress : ≃22W Power-off : ≃0.5W Suspend : ≃0.6W